Improving head /speech control, eye, EEG, etc). With the

Improving the quality of life for the elderly and disabled people and
giving them the proper care at the right time is one the most important roles
that are to be performed by us being a responsible member of the society.

It’s not
easy for the disabled and elderly people to mobile a mechanical wheelchair,
which many of them normally use for locomotion or movements. Hence there is a
need for designing a wheelchair that provides easy mobility. In this thesis, an
attempt has been made to propose a brain controlled wheelchair, which uses the
captured signals from the brain and processes it to control the wheelchair.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

Electroencephalography
(EEG) technique deploys an electrode cap that is placed on the user’s scalp for
the acquisition of the EEG signals which are captured and translated into
movement commands by the arduino microcontroller which in turn move the
wheelchair.

After measuring brain waves it delivers to brain
to computer interface unit which analyzed and amplified and classify waves into
alpha, beta, gamma, waves then arduino microcontroller controls the speed of the
wheelchair and the accelerometer provides direction to the wheelchair. The electric-powered wheelchair is a wheelchair
acting by an electric motor controlled with a hand-operated joystick. However,
some people suffering from severe motor disabilities cannot use the joystick,
such as paralysis and physically disable people and locked-in syndrome. So they
have other special devices available (touchpad, head /speech control, eye, EEG,
etc). With the objective of responding to numerous mobility problems, various
intelligent wheelchair related research have been created in the last years. In
this research try not only to give mobility to handicapped people but, more
importantly, independently of third party help. Despite these new types of
control methods, can acquire users intention to control the wheelchair.
However, each type of alternative control has its limitations. Wheelchair users are among the most visible
members of the disability community; they experience a very high level of
activity and functional limitation and also have less of employment
opportunities. Elderly people are the group with the highest rates of both
manual and electric wheelchair use.Wheelchair users report difficulty in basic life
activities, and perceived disability. It’s not easy for the physically
challenged and elderly people to move a mechanical or electric wheelchair. In
recent times there have been a wide range of technologies that help aid the
disabled physically challenged. These control systems are designed to help the
physically challenged specifically. These competitive systems are replacing the
conventional manual assistance systems. The wheelchair too has developed
significantly with a variety of guidance systems alongside like using the
joystick and a touch screen, and systems based on voice recognition. These
systems however are of use to those with a certain amount of upper body
mobility. Those suffering from a greater degree of paralysis may not be able to
use these systems since they require accurate control. To help improve the
lifestyle of the physically challenged further, this research work aims at
developing a wheelchair system that moves in accordance with the signals
obtained from the neurons in the brain through the electroencephalograph(EEG)
electrode.EEG stands for electroencephalogram, a electrode commonly used to
detect electrical activity in the brain. Detecting, recording, and interpreting
“brain waves” began in the late 1800s with the discovery and exploration of
electrical patterns in the brains and the technology has evolved to enable
applications ranging from
the medical detection of neurological disorders to playing games controlled
entirely by the mind. Brainwaves are produced by
synchronized electrical pulses from masses of neurons communicating with each
other. Brainwaves are detected using sensors (EEG electrode) placed on the
scalp. They are divided into bandwidths to describe their functions, but are
best thought of as a continuous spectrum of consciousness; from slow, loud and
functional – to fast, subtle, and complex. Our brainwaves change according to
what we are doing and feeling. When slower brainwaves are dominant we can feel
tired, slow, or dreamy. The higher frequencies are dominant when we feel active
or hyper-alert. Brainwaves are complex reflect different aspects when they
occur in different locations in the brain. Brainwave speed is measured in Hertz
(cycles per second) and they are divided into bands of slow, moderate, and fast
waves.

 

Infra low (<0.5HZ)   Delta Waves (0.5 to 3HZ).   Theta Waves (3 to 8HZ).   Alpha Waves (8 to 12HZ).   Beta Waves (12 to 38 HZ).   Gamma Waves (38 to 42HZ).       IV.METHODOLOGY Figure no. 4.1Block Diagram A.    Electric Wheelchairs Stop Accidental Rolling Once a manual wheelchair gets rolling, it can be hard to stop. Whether it's on a ramp or in San Francisco, a manual wheelchair can be prevented from rolling if you put the brakes on but are much harder to stop once they get rolling. Electric wheelchairs, on the other hand, can be slowed down and stopped with just the movement of the accelerometer. The power that makes it go is also an excellent way of making it stop. They're sturdier Weight can be one of the most daunting aspects of power wheelchairs, especially if you plan to take it anywhere. But that weight can also be a positive. Because the centre of gravity is lower with electric wheelchairs, they're much more difficult to tip over. This means that they're more solid when it comes to front-to-back tipping and side-to-side tipping. Weight has its advantages. If you're at a park and in a manual wheelchair, you or the person pushing you has to take into account the trip back to the starting point. A person who has lot energy at the start can get very tired moving a wheelchair around before too long. That means an exhausting trip back. The most obvious reason that electric wheelchairs beat manual ones is that they do all the work it takes to get someone from place to place. While many people could get themselves around with a manual wheelchair, there are some hills and inclines that are hard for just about everyone. Of course, there are quite a few people who simply don't have the arm strength or ability to use their hands that it takes to work a manual wheelchair. Without a motorized wheelchair, they would always require someone to move them around, while an electric wheelchair gives them freedom that wheelchair-bound people from 30 years ago couldn't experience. The paper is an essential need for disabled person to remove assistance. The paper implements a robot whose speed is controlled by the concentration level and the directions are given by a accelerometer basically it is a need of a disabled person to move around different places.  This robot also avoid accidents in panic situations due to the use of concentration level as in panic situation the concentration level drops down to zero so is the speed of the motor drops down zero.  This will help the person to independently move around without having a help or assistance of any different individual.   We performed a survey to obtain the concentration levels of handicap people and normal people, in order to determine the   threshold value of the concentration that will in turn help to provide the variation in the speed of the motors As we move further with the survey it has being determined that the concentration level of a handicapped person is 60-75% whereas for a normal person the concentration level varies between 70-85%.     Figure no. 5.1 Results of the survey carried out for the concentration levels       Table no. 5.2 Results of the survey carried out for the concentration levels            In this paper we have described our application and designed a wheelchair which is fully automated and controlled using Beta wave (human brain attention) of Mind wave sensor which is detected from brain signal. It uses Arduino to control wheelchair. The mind-wave mobile provides the data depending on the concentration level which in turn determines the speed of the wheelchair and accelerometer is used to provide direction to the wheelchair. The experimental results were very encouraging, which also demonstrated different concentration level of individuals which is used is controlling speed.